Part : Aryung Coolant Pump
Manufacturer Model Number : ACP-100HF 120
Manufacturer : Aryung
Product Description
ACP-FS serise is used in machine tools needed higher lift-up than ACP-F type. lt has Little idle working trouble because of no mechanical seal. lt is compact design and widely used in general machine tools.
The decreasing suction friction and high efficiency is improved by setting inlet bottom.
Product Specifications
| Specifications | |||
|---|---|---|---|
| Type | 100FS 120 | ||
| Pump | Discharge volume (/min) | 35 | 45 |
| Head | 2 m | ||
| In-let & Out-Let | 3/8" PS | ||
| Immersion Depth | 120 mm | ||
| Motor | Out-put | 100 W | |
| FrequencyVoltage | 50 Hz | 60 Hz | |
| Voltage | 200V/380V/415V | 220V/380V/440V | |
| Current | 0.5A/0.29A/0.27A | 0.55A/0.32A/0.31A | |
| Weight | 6 kg | ||
External Dimensions
Performance Range
The liquid should be filled the up and down limit line indicated the pump body side. But that the maximum level of liquid keeps below 20mm from tank top is better. If the liquid is over the maximum limit line, it happens the liquid dispersion. Reversely, the minimum liquid causes noise by air mixing or low performance of sucking particles from under tank. The discharging volume is sharply changeable by the viscosity. If the viscosity is high, the motor increases heat. So the viscosity of cutting oil keeps under 32 cSt. This pump is low head so that it can't discharge due to pipe resistance when the check valve is installed.
| TYPE | L | L1 | L2 | L3 | TL | R1 | R2 | PE |
| 100FS 120 | 120 | 19 | 70 | 20 | 282 | 90 | 90 | PS 3/8" |
| Product Name | Aryung Coolant Pump ACP -100FS 120 |
|---|---|
| Availability | Shipping directly from South korea. Import duties are included. |
| Estimated Delivery | 21 Days |
| Shipping For Product | 300.000000 |
| Calculate Shipping | Per Product Quantity |
| Enable Shipping Per Product | Yes |
| Brand | A-Ryung |
| Enable Request a Quote | Yes |
